Bootcamp Crack For Mac is just another PC. Sure, Macs come with macOS, but you can easily install Windows alongside macOS using Apple’s built-in Boot Camp feature.
Boot Camp installs Windows in a dual-boot configuration, which means both operating systems will be installed separately. You can only use one at a time, but you get the computer’s full power in each.
How to Switch Between Windows and OS X with Mac’s Boot Camp
If you own Intel-based Macs, you can run OS X and Windows on one machine. In fact, it’s been possible to run Windows on a Mac for some time — with agonizing limitations. Near-extinct Mac models were loaded with Virtual PC emulation software could do Windows, too, but the program was painfully slow. Even if you find an old copy of the software, it won’t work with any current Macs.
Boot Camp software from Apple shook up the computing public upon its apocalyptic arrival in April 2006. Boot Camp graduated from beta, or near-finished, status with the arrival of Leopard. Boot Camp Assistant software is stored in the Utilities folder inside the Applications folder.
Boot Camp itself is free. You have to supply your own single-disc or downloadable full-install version of Windows; an upgrade disc won’t cut it.
It’s also important to note that you can use a 64-bit version of Windows, Windows 7 (Home Premium, Professional, or Ultimate), Windows 8, or Windows 8.1. Consult Apple support to see which Mac models are compatible with which versions of Windows. In its current incarnation, Boot Camp isn’t compatible with 32-bit versions of Windows.
Other requirements follow
- An Intel Mac with OS X version 10.6 or later
- At least 2GB of RAM and 20GB of available space on the Mac’s storage drive that you want to donate to Windows
- A blank CD or USB storage device that you’ll use for Windows software drivers
If you don’t run into snags, the entire installation should take about an hour.
Windows 8 and Windows 8.1 are optimized for a touchscreen environment, though you can use it with a standard mouse and keyboard. For now, Macs don’t support touchscreen computing.
To install Windows 8 via Boot Camp, you still must have a legitimate Windows 8 license from Microsoft and a Win8 installation disc, assuming that you have an optical drive. If you don’t have an optical drive, you may be able to create a Windows installer from an ISO file downloaded from Microsoft on a USB flash drive that’s 8GB or larger.
Because snags are possible, back up all your important information on the Mac’s startup disk.
Following are the basic steps to get through Boot Camp:
- Run Boot Camp Assistant (in the Utilities folder inside the Applications folder) to make sure that you have the latest firmware on your computer and to install any support software from Apple that you might need.
- You’ll find any updates at Apple support. If you’re using a portable computer, make sure to connect the power adapter. You will also be given the option to create a Windows 7 (or later version) install disk for which you’ll need a USB flash drive and an ISO image downloaded from Apple.
- Follow the prompts in Boot Camp Assistant to create a partition for Windows.
- You’re essentially carving out an area of your hard drive for the Windows operating system,. This partition must be at least 30GB and can swell to the total free disk space on hand minus 30GB. If you don’t plan on doing much in Windows, keep the partition small.
- Drag the divider to set the partitions for both OS X and Windows, or click Divide Equally to make equal partitions. You can’t resize a Windows partition after creating it, though you can replace it with a larger Windows partition.
- If you have a Mac Pro with more than one internal hard drive, you can select which drive to partition. If any of this makes you nervous, know that you can remove the Windows partition later and go back to a single-partition Mac.
- Insert the Windows CD or a USB flash drive with the Windows ISO file and then click Start Installation.
- If you exited Boot Camp Assistant before installing Windows, open it again, choose Start the Windows Installer, and click Continue.
- When you’re asked to choose the Windows partition, select the partition that says BOOTCAMP.
- You may have to scroll down to see it.
- Don’t erase any partitions that you see or create a new partition here. Failure to heed this warning could wipe out your entire Mac OS X startup disk.
- (Optional) If you see a listing for Drive Options, click it; otherwise, proceed to Step 6.
- Reformat the partition by using the Windows installer: Click Format.
- You’re using the reliable and secure NTFS file system, but you won’t be able to save files to Windows from Mac OS X, at least not without a techie workaround.
- Follow the onscreen instructions to finish installing Windows.
- Boot Camp 5.1 includes several Mac drivers so that Windows will recognize your trackpad, Thunderbolt, USB 3.0, the iSight (or FaceTime) camera, the Eject key on the Mac keyboard, networking, audio, graphics, and so on.
- A Boot Camp Control Panel for Windows and an Apple Boot Camp system-tray item will be added.
As with any new Windows computer, Microsoft requires that you activate your Windows software within 30 days.
Switching operating systems
You can go back and forth between OS X and Windows on your Mac, but you can’t run both operating systems simultaneously under Boot Camp. Instead, you have to boot one operating system or the other — thus, the name Boot Camp.
Restart your Mac, and hold down the Option key until icons for each operating system appear onscreen. Highlight Windows or Macintosh HD, and click the arrow to launch the operating system of choice for this session.
If you want OS X or Windows to boot every time, choose app → System Preferences, click Startup Disk, and choose the OS you want to launch by default.
You can perform the same function in Windows by clicking the Boot Camp system-tray icon and selecting the Boot Camp Control Panel. Click either the Macintosh HD or Windows icon, depending on your startup preference.
Do You Actually Need to Use Boot Camp?
Before you install Windows, stop and think about whether or not Boot Camp is the best choice for your needs. There are a couple of drawbacks to consider.
When you use Boot Camp to install Windows on your Mac, you’ll need to re-partition your drive, which is going to take up quite a bit of your available drive space. Since storage on a Mac is fairly expensive, it’s something you should really think about. In addition, you’ll need to reboot every time you want to use Windows, and reboot again when you want to switch back to macOS. The benefit of Boot Camp, of course, is that you’re running Windows directly on the hardware, so it’ll be a lot faster than a virtual machine.
If all you need to do is run a few Windows applications on your Mac, and those applications don’t a lot of resources (like 3D games), you might consider using a virtual machine like Parallels (there’s a free trial), VMware Fusion, or VirtualBox to run that software instead. The vast majority of the time you don’t actually need to use Boot Camp, and you’d be better off using a virtual machine. If, however, you’re looking to play Windows games on your Mac, Boot Camp might be a good choice.
For most people, though, Parallels makes running Windows on your Mac dead simple. It’s something we use at How-To Geek every single day for testing software and running Windows. The integration with macOS amazingly well done, and the speed blows away Virtualbox. In the long run, the price is well worth it. You can even use Parallels to load your Boot Camp partition as a virtual machine while you are in macOS, giving you the best of both worlds.
Eventually, your Mac will reboot and you’ll see the standard Windows installer
Select the partition labeled BOOTCAMP if asked—do not install to any other partition, or you might end up removing macOS and losing all your data. (You did back up, right?) Windows will now finish installing normally.
The Windows on-boarding process might ask you to connect to the Internet, but you won’t be able to do this without drivers: just skip these steps until you get to your desktop, at which point the Boot Camp installer will appear.
Proceed with the installer to set up your drivers, and you should be all set!
What Version of Windows Can I Run?
Which version of Windows you can run depends on your Mac: recent models support only Windows 10, while some older Macs only work with older versions of Windows. Here’s a quick outline, along with links to Apple’s official lists of supported models.
- Windows 10 is supported on most Macs made in 2012 and later.
- Windows 8.1 is supported on most Macs made between 2010 and 2016, with some exceptions.
- Windows 7 is supported, for the most part, only on Macs made in 2014 and earlier, and you’ll need an even older Mac to run Windows Vista or XP.
Note that Macs can only run 64-bit, non-Enterprise versions of Windows.
To install Windows, you’ll need an ISO file of the installer. You can download Windows installation media for free if you already have a product key, though you don’t really need a product key to run Windows 10. If you’re installing Windows 7, you’ll also need a USB drive at least 16GB in size for the installer and drivers. Windows 8.1 and Windows 10 do not any external drive for installation
How to Install Windows on Your Mac
Ready to install Windows? It’s probably a good idea to back up your Mac before getting started, just in case. Odds are nothing will go wrong, but any time you’re partitioning things there’s always a chance. Done? Let’s get started.
You’ll use the Boot Camp Assistant application that comes on your Mac. Open it by pressing Command+Space, typing Boot Camp, and pressing Enter.
The Boot Camp Assistant will walk you through partitioning, downloading drivers, and starting the installer for you. Click “Continue” and you’ll be asked which ISO file you’d like to use and how big you’d like your Windows partition to be.
How to Boot Into Windows On Your Mac
By default, your Mac will still boot to macOS. To access Windows, you need to turn off your Mac, then turn it on while holding the Option key. You’ll be asked which drive you’d like to boot from.
If you’d like to boot to Windows by default, you set this in recovery mode, or using the Boot Camp Control Panel in Windows. You’ll find this in your system tray after installing Windows, though you may have to click the Up arrow to find it.
This control panel allows you to choose the default operating system your Mac boots to, as well as tweak keyboard and trackpad settings.
While in Windows, the Mac’s Command key functions as the Windows key, while the Option key functions as the Alt key. If you have a Touch Bar, you’ll see a complete set of buttons, similar to the Extended Control Strip in macOS.
To see the function keys (F1, F2, etc.) simply hold down the Fn key. There’s no way to make this the default in Windows.
How to Remove Windows From Your Mac
If you want to remove Windows from your Mac and free up space, reboot into macOS and open the Boot Camp Assistant again. You’ll see the Restore Disk to a Single Volume option.
Boot Camp Assistant will automatically remove Windows and expand the macOS partition for you, reclaiming all of that space. Warning: This will delete all the files on your Windows partition, so be sure you have backup copies first!
- Mac OS X Kodiak, 10.0 (Cheetah), 10.1 (Puma), 10.2 (Jaguar), 10.3 (Panther), 10.4 (Tiger), 10.5 (Leopard), 10.6 (Snow Leopard), 10.7 (Lion)
- OS X 10.8 (Mountain Lion), 10.9 (Mavericks), 10.10 (Yosemite), 10.11 (El Capitan)
- macOS 10.12 (Sierra), 10.13 (High Sierra), 10.14 (Mojave), 10.15 (Catalina), 11.0 (Big Sur) and Later Version.
- Supported Hardware: Intel or Apple Chip (M1) or PowerPC Mac.
Bootcamp For Mac installer will also partition your disk, copy the installer to that partition, and place the drivers so they’ll run after installation. You can keep using your Mac while all this is running, though things will slow down a lot during the partitioning phase.
How you should allocate the space depends on how much space you want for your Windows system and how much space you want for your macOS system. If you want to resize your partitions after this process, you’ll need to use a third-party tool, so choose carefully now.
Note that, if you’re installing Windows 7, the order here is slightly different: Boot Camp will first guide you through setting up your installer USB disk, then ask you about partitioning.
When you’re ready, click “Install” and Boot Camp will start downloading drivers, which it calls “Windows support software.”